Answer 1

Hello,

Thank you for your question.

At this moment there is no feature that would allow to modify digital outputs through AWS using MQTT protocol that is enabled in Firmware.

For more detailed information and implementation about the MQTT and AWS please reach out to us via VIP Helpdesk or contact your sales manager/distributor. If you don't have any contacts with our Sales managers, please contact them on our official website https://teltonika-gps.com/ and click on the "Contact Us" button. When you will click, please fill the form and submit it.

Best regards.

Comments

Please give us solution to modify the Digital Output Values

---

Please reach out to us via our official website and tell us your scenario when and how you would like to modify digital output values.

---

Hi,

We were waiting for a new firmware(with MQTT) to modify digital output in FMB130/FMC130 and Teltonika team shared new firmware update but unbale to modify the digital output.
(Please reach out to us via our official website and tell us your scenario when and how you would like to modify digital output values.)
We need a firmware to monitor the digital inputs and need to switch on digital outputs for small application through AWS with MQTT protocol.

---

Hello,

Please contact us via Helpdesk, we might have a solution for you.

Kind regards.