Question

Hello,

I would like to ask you guys about the car accumulator,

My clients was asking me if he takes out the accumulator does the vehicle will work or will send updates?

if yes for how long after he takes out will send updates?

I'm talking about fmb 120

Answer 1

Hello Egzondibra,

Good day. Thank you for your question.

If you are referring to the car battery, then yes, the device will work without an external power source but the duration depends on the state it is in. Please refer here to the power consumption of the device under each state - https://wiki.teltonika-gps.com/view/FMB120_General_description#Technical_features

So let's say that the device is under the nominal mode, so the average power consumption is 35.23mA. The battery capacity of FMB120 is 170mAh. Therefore, 170/35.23 = 4.825 (approximately 4 hours 49 minutes) under the ideal conditions as this may change depending on the configuration of the device.

Please let me know if you have any questions.

Kind regards.

Comments

It works fine, but the only issue is that it doesn't show me the route, and the location

---

Hello Egzondibra,

Good day. Thank you for your reply.

We would like to analyze your issue but we require more information from the device, therefore, kindly reach out to us via VIP Helpdesk or contact your Sales Manager/Distributor. If you don't have any contacts with our Sales managers, please contact them on our official website https://teltonika-gps.com/ and click on the "Contact Us" button. When you click, please fill the form and submit it.

Note: as a topic, please choose "Vehicle telematics" or you can send an e-mail with the description of your situation to info@teltonika.lt

When contacting us please provide the IMEI, logs, the configuration file, and the firmware version. Please follow these recommendations: https://wiki.teltonikagps.com/view/Recommendations_for_filling_a_query_description

Thank you in advance.

Kind regards.