FOR TIPS, gUIDES & TUTORIALS

subscribe to our Youtube

GO TO YOUTUBE

4167 questions

4739 answers

3460 comments

0 members

We are migrating to our new platform at https://community.teltonika.lt. Moving forward, you can continue discussions on this new platform. This current platform will be temporarily maintained for reference purposes.
0 votes
329 views
in Vehicle tracking by anonymous
i am trying to connect blue coin mag to fmb204 but i can not read the mag sensor , i already activated with nfc and read the values on the phone but not on fmb 204. i already have one temp sensor and everything is working correct with the first temp sensor and trying to put the second mag  sensor . as a preset values i put ELA MOV MAG IS THAT CORRECT ? ALSO I TRY TO SET IT AS A CUSTOM 2 , any support  will be very helpfull . Thank you

2 Answers

0 votes
by anonymous

Hello

We would like to analyze your issue.

Please contact your sales manager. If you don't have any contacts with our Sale managers, please contact with them on our official website https://teltonika-gps.com/ and click on the "Contact Us" button. When you will click, please fill the form and submit it. Note: as a topic, please choose "Vehicle telematics". Or you can send an e-mail with description of your situation to info@teltonika.lt When contacting us please follow these recommendations: https://wiki.teltonika-gps.com/view/Recommendations_for_filling_a_query_description

0 votes
by anonymous
Hello.

ELA MOV MAG is correct preset for mag sensor from ELA. Sensor Data schould be available in BLE custom 1 I/O.

Mag sensor value is sent as two byte data, please check frame secification available on ELA site:

https://elainnovation.com/wp-content/uploads/2020/10/BLE-Frame-specifications-11B-EN.pdf

ELA MAG sends data 15-bit counter & instantaneous state* on 1 bit (LSB).

Regards
by anonymous
MAG Mode data Example:
IO ID[331] Length[ 2]: 00 02 BLE Custom 1
00 02 - 0000 0000 0000 0010 (15 Bits Movement Counter: Attached/Detached Counter 1 time; 1 bit State
of Sensor: Current State 0, Detached)
by anonymous
Hello and thank you for the support ,I made some progress but not yet to the final target ,i put the preset values in the configuration for Fmb204 (as mov mag ) and in the first row as an action is match and as io I enter  none and in the second row I put as an action save and as io custom 1!and now I see on the i/o page the value 0x0027 ,how I make it  to read on or off ,is this possible also when i de-attach the magnet nothing change ??
by anonymous

Hello.

Hello.

Default presets schould work with your sensor and there is no need to change.

Please check and provide what is tag version of your sensor. You can verify it with device manager application. Also please provide FMB204 firmware. If sensor value is 0027 then converted to binary -> 00100111. Last (LSB) byte is sensor state, others: counter:

LSB:1 -> attached

0010011 -> converted to DEC is 19, counter=19

by anonymous
thnak once again but probably i dont have all the correct knowledge or i miss something , i am new to teltonika devises .. . i try to do all the set up with the windows teltonikika configurator , so i dont know where to convert to binary 00100111 or what lbs 1 is ?? so can you advise if there is a possibility with the configurator to change the view or binary in another way or where i have to go and convert them ..

also firmware ver:03.27.07_00 ,

sensor tag version is 2.2

thank you for the lesson .
by anonymous

Hello.

There is no possibility to change view and see another format of data.

LSB - least significant byte

https://en.wikipedia.org/wiki/Bit_numbering

to convert from hex to binary you may use on-line tools like for example rapid tables:

https://www.rapidtables.com/convert/number/ascii-hex-bin-dec-converter.html

Regards