FOR TIPS, gUIDES & TUTORIALS

subscribe to our Youtube

GO TO YOUTUBE

4167 questions

4739 answers

3460 comments

0 members

We are migrating to our new platform at https://community.teltonika.lt. Moving forward, you can continue discussions on this new platform. This current platform will be temporarily maintained for reference purposes.
0 votes
376 views
in Vehicle tracking by anonymous

2 Answers

0 votes
by anonymous

Hello there,

Good day. Thank you for the question.

There are commands that you can send via SMS/GPRS to the devices. 

The list of SMS/GPRS commands can be found at https://wiki.teltonika-gps.com/view/FMB920_SMS/GPRS_Commands

Also, for the parameter ID list you can refer here https://wiki.teltonika-gps.com/view/FMB920_Parameter_list

The SMS Command structure are as follows:

With SMS login and Password :- <SMS login><space><SMS password><space><Command><Space><Value>

Without SMS login and Password :- <space><space><Command><Space><Value>

To answer the question that you have raised above, you will need 2 information; the SMS/GPRS command and Parameter ID.

1) https://wiki.teltonika-gps.com/view/FMB_SMS/GPRS_Commands setparam #:#

2) https://wiki.teltonika-gps.com/view/FMB920_Parameter_list#Overspeeding_scenario_parameters 11100(0) - where 0 is to disable the Overspeeding scenario

Therefore, the answer is 

With SMS login and Password :- <SMS login><space><SMS password><space>setparam 11100:0

Without SMS login and Password :- <space><space>setparam 11100:0

Please go through the links above and let me know if this helps.

Kind Regards.

by anonymous
this is the best answer. The solution works for me very well. As long as the device is powered on, it will reply with a new value sms and for me to be sure that the value has been set, I just restart.
0 votes
by anonymous

i am also facing same problem how can i solve this? myfiosgateway login

 spice money b2b

by anonymous

Hello Kamesh, 

Good day. Thank you for your question.

Please send the following SMS command to the device, to disable Overspeeding:

With SMS login and Password :- <SMS login><space><SMS password><space>setparam 11100:0 or "login password setparam 11100:0"

Without SMS login and Password :- <space><space>setparam 11100:0 or "  setparam 11100:0"

If you are sending via GPRS then you may skip the login, password, and <space>.

Kindly try this and let me know if it helps.

Best regards.