Hi, I have a FMU 130 device with the 1-Wire RFID reader, works fines: If I put the card near the reader the value is shown in I/O Id button line.
Now, I would like do 2 things:
1. Is possible activate DOUT1 when the tag is readed? I tried to put Immobilizer - Output Control to DOUT1, connect a light to DOUT1 output (red/white cable) and the other side to 12V, but nothing happens)
2. The record is sent to the server only when the Immobilizer scenario is in High Priority mode in the Fetature section? Is there another way to send the value of RFID tag to server???
Thanks a lot