Question

which codec12 byte vector should I send to restart the equipment by GPRS?  I don't want to send SMS

Comments

Find out the problem.

If the equipment is connected to COM it does not restart.

Answer 1

Hello.

SMS/GPRS command to reset device is: cpureset

https://wiki.teltonika-gps.com/view/FMB120_SMS/GPRS_Commands

Please check Teltonika Wiki for details how to send messages over GPRS Codec 12:

https://wiki.teltonika-gps.com/view/Teltonika_Data_Sending_Protocols#Codec_12

Regards

Comments

I'm doing according to the documents sent the command below, but it doesn't restart:

{& H0, & H0, & H0, & H0, & H0, & H0, & H0, & H10, & HC, & H1, & H5, & H0, & H0, & H0, & H8, & H63, & H70, & H75, & H72, & H65, & H73, & H65, & H74, & H0 , & H0, & H7A and H75}

Are the bytes correct?


When sending another getinfo command it works, but CPURESET does not.

{& H0, & H0, & H0, & H0, & H0, & H0, & H0, & HF, & HC, & H1, & H5, & H0, & H0, & H0, & H7, & H67, & H65, & H74, & H69, & H6E, & H66, & H6F, & H1, & H0F, & H1, , & H43 and H12}

---

Hello.

Please note that cpureset does not provide any answer.

To verify if device has reset, send getinfo to device and check UpTime parameter, it schould reset

https://wiki.teltonika-gps.com/view/FMB_getinfo

Answer 2

A codec is a device or computer program for encoding or decoding a digital data stream or signal. Codec is a portmanteau of coder–decoder. A codec encodes a data stream or a signal for transmission and storage, possibly in encrypted form, and the decoder function reverses the encoding for playback or editing. best star wars apps

https://wiki.teltonika-gps.com/view/FMB120_SMS/GPRS_Commands