Question

Hello,

I'm looking for a connection diagram to install an FMB140 on a Kubota U50-5. I only need the CAN L and CAN H connections. Thanking you in advance foryour help.

Best regards

Answer 1

Hi William

Measuring voltage with a mutltimeter

* CAN HIGH VOLTAGE- value should normally be in between 2.5 and 3.5 Volts. Measured on a machine that is running, it will usually range between 2.7 and 3.3 Volts

* CAN LOW VOLTAGE- value should normally be in between 1.5 and 2.5 Volts. Measured on a machine that is running, it will usually range between 1.7 and 2.3 Volts

If you cannot find the right wire you can ask for a wiring diagram. For wiring diagram (ALLCANN300/LV200/CANCONTROL) please kindly contact your sales manager. If you don't have any contacts with our Sale managers, please contact with them on our official website https://teltonika-gps.com/ and click on the "Contact Us" button. When you will click, please fill the form and submit it. Note: as a topic, please choose "Vehicle telematics". Or you can send an e-mail with description of your situation to info@teltonika.lt 

Best Regards,

Maynard

Comments

Hello M. Maynard,

thank you very much for your answer and also the solution provided. The technician from my service provider who uses teltonika boxes tells me that this FMB140 box is not compatible with this construction machine. It's for this reason that I allowed myself to ask my question on this community !!

Wishing you very good day.

Best regards,

William D.