Hello Boboho,
Good day. Thank you for your question.
I will suggest connecting to DIN 1/DIN 2 instead. So in the Configurator, you will need to enable the Pulse Counter DIN1 or DIN2 depending on which is used. DIN gives 0 and 1, so in a sense, the change between 0 and 1 is a pulse. We have separate IO elements which count those pulses. See the image below for the I/O settings that need to be enabled in the Configurator.
. 
Please note that each digital input has its own threshold. For more information, please refer here - https://wiki.teltonika-gps.com/view/Impulse_counter
If you require more information, please contact us via VIP Helpdesk or your Sales Manager. If you don't have any contacts with our Sales Managers, please contact them on our official website https://teltonika-gps.com/ and click on the "Contact Us" button. When you will click, please fill the form and submit it.
Note: as a topic, please choose "Vehicle telematics" or you can send an e-mail with the description of your situation to info@teltonika.lt
Thanking you in advance.
Kind regards.
