Question

Hi,
I've installed a FMB120 in my car, it seems to be working and I receive some data from the car, but I can't receive any alarm.
I receive other status codes (240/246), but I never receive the 236 status. I'm using the digital input 3 as stated in the manual, but nothing.
What may I be doing wrong?
Thanks,

Andrea

Comments

Actually, I just receive the status codes

• 239
• 240
• 246

Nothing else. I even have a CAN-CONTROL connected, so I should receive a lot more data

---

Hi,

How to connect alarm??

How can I check the data of the states?

Answer 1

Hello Andre,

Good day. Thank you for your question.

May I know if you have enabled the parameters in the I/O settings? If yes, we would like to analyze your issue. Please contact your sales manager. If you don't have any contacts with our Sales managers, please contact them on our official website https://teltonika-gps.com/ and click on the "Contact Us" button. When you will click, please fill the form and submit it.

Note: as a topic, please choose "Vehicle telematics" or you can send an e-mail with the description of your situation to info@teltonika.lt

When contacting us please provide the IMEI, logs, configuration file, and firmware version. Please follow these recommendations: https://wiki.teltonikagps.com/view/Recommendations_for_filling_a_query_description

Thank you in advance.

Kind regards.

Comments

Hello.

AVL 236 is Alarm from device scenario and it is not CAN adapter parameter.

Vehicle alarm status (if available) is sent as a flag in Security State Flag (AVL Id 132) or Security State Flag P4 (AVL Id 517, Codec 8 Extended must be enabled):

https://wiki.teltonika-gps.com/view/FMB120_CAN_adapters#CAN_Adapter_State_Flags

Regards