Hello there,
Good day. Thank you for your question.
The device will wake up from ultra sleep mode if DIN1 or movement is detected by the accelerometer. Therefore, please ensure that your Ignition source is DIN1 and is connected to the ignition wire. (
https://wiki.teltonika-gps.com/view/FMB920_Sleep_modes#Ultra_Deep_Sleep_mode)
We do not have specific values for motorcycles - we can only recommend the default values. These values are applied for light vehicles more often but should be fine for motorcycles as well.
Regarding the lean angle - you should probably test it and see, whether the device will detect that angle with the current configuration since we do not know any information about the lean angle, etc. You may also contact your distributor or sales manager to provide you with access to the VIP Helpdesk so we can analyze this use case. If you don't have any contacts with our sales managers, please contact them on our official website
https://teltonika-gps.com/ and click on the "Contact Us" button. When you will click, please fill the form and submit it.
Note: as a topic, please choose "Vehicle telematics" or you can send an e-mail with the description of your situation to info@teltonika.lt
Thank you for your understanding.
Kind regards.