Question

Hello,

i'm tring to read tachograph data from VDO 1381 (V. 2.11) trought FMC640 K-LINE

Tachocheck sms response is

CAN_2:111,FBCF,K-LINE:1

In the tachograph data section in the configuration software I can read only TIMESTAMP, VEHICLE SPEED, ODOMETER, VIN but nothing relative to the driver card and his driving times.

Any suggestions?

Comments

Hello

I am having the same issue

How did you get on with this?

Thank you

Answer 1

Hello,

Driver 1 card and Driver 2 card schould be avaible through K-Line.

Driver 1 and 2 Continuous drive time is not avaible on K-Line, please check Wiki page for all parameters avaible via K-Line:

https://wiki.teltonika-gps.com/view/FMB640_LVCAN_I/O,FMS_IO_and_Tachograph_data_elements

Also please check if your device has current firmware installed, firmware verions could be checked on Teltonika Wiki:

https://wiki.teltonika-gps.com/view/Fleet_management -> find your device -> Firmware Errata

If you don't have current firmware version please create query on VIP helpdesk and if you don't have VIP helpdesk please
contact your sales manager.
If you don't have any contacts with our Sale managers, please contact with them on our official website https://teltonika-gps.com/
and click on the "Contact Us" button. When you will click, please fill the form and submit it.
Note: as a topic, please choose "Vehicle telematics".
Or you can send an e-mail with description of your situation to info@teltonika.lt

Best Regards