Question

Hello.

We are trying to read can bus data Chevrolet NKR 2019 with FMU130 and Allcan 300. Our local teltonika sales manager provided a wiring diagram. When we connected all-can 300, the led are blinking correctly. I tried to configurate the all-can but it doesnt respond i tried to configurate it through sms command too but it respond "ProgNum:0 " ( i tried with 3,4 and 5 digit program code ).

According teltonika docs. that trucks models is compatible with all-can 300
FMU Firmware > FW 03.25.10 Rev:166

Thanks in advanc

Answer 1

Hello,

Thank you for the question.
We do have a never firmware with CAN adapter improvements, but unfortunately, we cannot provide any firmware version by the crowd support forum, we recommend you contact with your sales manager.
If you don't have any contacts with our Sale managers, please contact them on our official website:
https://teltonika-gps.com/
Please click on the "Contact Us" button. When you will click, please fill the form and submit it.
Note: as a topic, please choose "Vehicle telematics".
Or you can send an e-mail with a description of your situation to [email protected]

Best Regards,