Question

Hi,

we are using some fmb 630 & 640 devices. All devices are configured with mCAN.

FMB 640 can send last known parameters when can bus dosen't work (ingition off for example)

Where can I find this options on FMB630?

Answer 1

Hello, this option is in LVCAN settings, default it is set to send last known value (disabled)

Comments

In our configuration, this parameter is disabled. but device dosen't send CANbas data.

mb this paramet only relevant to LVCAN? we use manual can

---

Hello,

Try to set "Send data even if it is not present on CAN bus" to always and "Data type" to Last known value in CAN configuration:

Regards

---

Thanks, but i cant find this options in my configurator.

Mb i can setup via SMS? What param?

---

Hello,

Please write your device firmware version, you can check it with getver SMS command

---

we have 2 version frimware: 00.02.72 and 00.02.42

---

Hello,

Please update your devices to current firmware version which is 01.00.34.
https://wiki.teltonika-gps.com/view/FMB630_firmware_Errata

After update this option will be enabled. Ask your Sales Manager for the firmware file or if you don't have Sales Manager contact Us via Teltonika Website: https://teltonika-gps.com/ -> Contact Us button

Regards

---

Does this firmware (01.00.34.) support 2 mcan?

---

Version 01.00.34 supports Manual Can, you could download Configurator for that device with fimware 01.00.34 and check for avaible options.

Configurator is avaible on Wiki page:

https://wiki.teltonika-gps.com/view/FM_Configurator_versions#For_FMB6XY_.2F_FM63XY

Regards