Question

Kindly advice if below parameters will reduce excessive data sending on FMB120, while vehicle on stop.

setparam 10000:300

If not please assist with the correct one.

Thanks

Answer 1

Hello,

Thank you for your question.

By default, our devices send data every 3600 seconds (1 h). By your mentioned value, FMB120 will send every 300 seconds (3 min 20 s).

If you want to get data every 3 min and 20 s, then your SMS command is correct.

Please let us know if you will have questions or you will need any help.

Best Regards,

Teltonika Support

Comments

Good Morning,

Thank you for your feedback - Much appreciated.

I need the FMB120 to send data every 10 minutes for Ignition Off/Stop Status,and every 2 sec for Moving Status.

How do I set that on Teltonika Configurator (Data Acquisition)?

Regards