Question

we want to connect the dynamo of the crane, it gives 24 V and 60 amps at max.

Can the FMB 920 withstand the current, please confirm the same and also for the Din and Dout pins max amps that can be given

Answer 1

Hello,

Thank you for your query.

All electrical characteristics of FMB920 you can find on our Teltonika Wiki page: https://wiki.teltonika.lt/view/FMB920_General_description#Electrical_characteristics

Please let us know if you will have more questions for us.

Best regards,

Teltonika Support

Comments

There is no information on maximum current there, Onces send the value.

thanks.

Answer 2

Hi,

You can connect 24 V, 60 A supply to Analog and Digital inputs.Both will work fine.

For the Digital input and Analog input,  You need to consider only the maximum voltage rating.In the case of FMB 920 it's 32 Volt Maximum.

The amount of current will flow through the circuit is directly depends on the load. ( I = P/V )

For the digital output, the maximum current will be 0.5 A.

If you are using a 24 V Power supply for teltonika, the maximum watt of your load should be 12.

Thanks in advance

Naveen